The Vacupor® product rangeOur Vacupor® - Vacuum Insulation Panels and Vacupor® - Inserts are available in various types, which are adjusted to the relevant requirements of different applications. The following versions are available at the moment:
- Vacupor® NT
Vacupor® NT is the standard design of our vacuum insulation panel. Through the use of different barrier foils, Vacupor® NT can be adapted individually to the requirements of different applications, regarding life span, robustness and cost. more...
- Vacupor® NT-B2
Vacupor® NT-B2 is the basic version of our building authorities approved Vacuum Insulation Panels.
The German Institut for civil engineering (DIBT) granted the approval by the building authorities for various Vacupor® types under the certification number Z-23.11-1662.
The approval was granted for certain Vacupor® variations and its use in a total of ten applications for indoor- and outdoor-applications. more...
- Vacupor® NT-B2-S
Vacupor® NT-B2-S is the basic version of our building authorities approved "S-type" Vacuum Insulation Panels with a rated value of 0,007 W/(m*K) .
The German Institut for civil engineering (DIBT) granted the approval by the building authorities for Vacupor® NT-B2-S under the certification number Z-23.11-1662.
The approval was granted for various Vacupor® types and its use in a total of ten applications for indoor- and outdoor-applications. more...
- Vacupor® RP-B2
Vacupor® RP-B2 is the rubber granule mat protected version of our building authorities approved Vacuum Insulation Panels.
The German Institut for civil engineering (DIBT) granted the approval by the building authorities for various Vacupor® types under the certification number Z-23.11-1662.
The approval was granted for certain Vacupor® variations and its use in a total of ten applications for indoor- and outdoor-applications. more...
- Vacupor® RP-B2-S
Vacupor® RP-B2-S is the rubber granule mat protected version of our building authorities approved "S-type" Vacuum Insulation Panels with a rated value of 0,007 W/(m*K).
Dated 17th of June 2009 the German Institut for civil engineering (DIBT) granted the approval by the building authorities for Vacupor® RP-B2 under the certification number Z-23.11-1662.
The approval was granted for the products Vacupor® NT-B2, Vacupor® RP-B2 and Vacupor® PS-B2 and its use in a total of ten applications for indoor- and outdoor-applications. more...
- Vacupor® PS-B2
Vacupor® PS-B2 is the polystyrene sheet protected version of our building authorities approved Vacuum Insulation Panels.
The German Institut for civil engineering (DIBT) granted the approval by the building authorities for various Vacupor® types under the certification number Z-23.11-1662.
The approval was granted for certain Vacupor® variations and its use in a total of ten applications for indoor- and outdoor-applications. more...
- Vacupor® PS-B2-S
Vacupor® PS-B2-S is the polystyrene sheet protected version of our building authorities approved "S-type" Vacuum Insulation Panels with a rated value of 0,007 W/(m*K).
The German Institut for civil engineering (DIBT) granted the approval by the building authorities for various Vacupor® types under the certification number Z-23.11-1662.
The approval was granted for the certain Vacupor® variations and its use in a total of ten applications for indoor- and outdoor-applications. more...
- Vacupor® XPS-B2
Vacupor® XPS-B2 is the extruded polystyrene foam (XPS) sheet protected version of our building authorities approved Vacuum Insulation Panels.
Vacupor ® XPS-B2 is particularly suitable for plane layings on ceilings and walls.
Through this coverage, the fixing of the insulation is much easier, due to the possibility of bonding with commercially available polystyrene adhesives. more...
- Vacupor® XPS-B2-S
Vacupor® XPS-B2-S is the extruded polystyrene foam (XPS) sheet protected version of our building authorities approved "S-type" Vacuum Insulation Panels and a rated value: 0,007 W/(m*K) .
Vacupor ® XPS-B2-S is particularly suitable for plane layings on ceilings and walls.
Through this coverage, the fixing of the insulation is much easier, due to the possibility of bonding with commercially available polystyrene adhesives. more...
- Vacupor® TS-B2
Vacupor® TS-B2 is our building authorities approved Vacuum Insulation Panel with recycling noise-reduction-sheet lining.
Vacupor ® TS-B2 is particularly suitable for floor insulation, where noise reduction and load distribution is required.
Through this coverage, the fixing of the insulation is much easier, due to the possibility of bonding with commercially available adhesives. more...
- Vacupor® TS-B2-S
Vacupor® TS-B2-S is the building authorities approved "S-type" Vacuum Insulation Panel with recycling noise-reduction-sheet lining and a rated value of 0,007 W/(m*K).
Vacupor ® TS-B2-S is particularly suitable for floor insulation, where noise reduction and load distribution is required.
Through this coverage, the fixing of the insulation is much easier, due to the possibility of bonding with commercially available adhesives. more...
- Vacupor® FP
Due to the usage of a special silicate fiber-filament in combination with a higher density, Vacupor FP is suitable for applications where higher demands on the fire protection properties are required.The density of the core material is significantly higher and prevents the core from collapsing in case of fire. more...
- Vacuspeed®
Building authorities approved Vacuum Insulation Panel for the Vacuspeed® system.
Dated 18th of December 2009 the German Institut for civil engineering (DIBT) granted the approval by the building authorities for various Porextherm VIPs under the certification number Z-23.11-1662.
Amongst others, the approval was granted for Vacuspeed® and its use in a total of ten applications for indoor- and outdoor-applications. more...
- Vacuspeed® CUT
Polyurethane edge-strip for the Vacuspeed® System more...
- Vacupor® Insert NT
Vacupor® Insert NT is our standard core material (Insert) for the production of Vacuum Insulation Panels. Vacupor® Insert NT is available shrink-wrapped in a PE plastic foil or wrapped into a PP non-woven material. In Vacuum Insulation Panels extraordinarily low heat conductivity values and enormously long life times can be reached with this core. more...
- Vacupor® Insert FP
Through the use of a silica fiber filament together with higher density, Vacupor® Insert FP is particularly suitable for the production of Vacuum Isulation Panels, with higher demands for fire protection porperties. The core material is clearly firmer and remains stable in case of fire. more...
Overview |
