The Vacupor® product range
Our Vacupor® - Vacuum Insulation Panels and Vacupor® - Inserts are available in various types, which are adjusted to the relevant requirements of different applications.
The following versions are available at the moment:
- Vacupor® NT
Vacupor® NT is the standard design of our vacuum insulation panel. Through the use of different barrier foils, Vacupor® NT can be adapted individually to the requirements of different applications, regarding life span, robustness and cost. more...
- Vacupor® NT-B2
Vacupor® NT-B2 is the basic version of our building authorities approved Vacuum Insulation Panels. Dated 17th of June 2009 the German Institut for civil engineering (DIBT) granted the approval by the building authorities for Vacupor® NT-B2 under the certification number Z-23.11-1662. The approval was granted for the products Vacupor® NT-B2, Vacupor® RP-B2 and Vacupor® PS-B2 and its use in a total of ten applications for indoor- and outdoor-applications. more...
- Vacupor® RP
For protection purposes Vacupor® RP is covered on one or both sides of the panel with a sheet of rubber granulate. Due to this coverage, Vacupor® RP is excellently suitable for all kinds of plane layings. The construction of the insulation is considerably facilitated and the VIPs can be entered without danger of damaging. more...
- Vacupor® RP-B2
Vacupor® RP-B2 is the rubber granule mat protected version of our building authorities approved Vacuum Insulation Panels. Dated 17th of June 2009 the German Institut for civil engineering (DIBT) granted the approval by the building authorities for Vacupor® RP-B2 under the certification number Z-23.11-1662. The approval was granted for the products Vacupor® NT-B2, Vacupor® RP-B2 and Vacupor® PS-B2 and its use in a total of ten applications for indoor- and outdoor-applications. more...
- Vacupor® PS
Vacupor® PS is excellently suitable for all kinds of wall and floor layings. Vacupor® PS is covered with polystyrene sheets on both sides. Due to this coverage, the fixing of the insulation is substantially facilitated, through the possibility of bonding with commercial polystyrene adhesives. more...
- Vacupor® PS-B2
Vacupor® PS-B2 is the polystyrene sheet protected version of our building authorities approved Vacuum Insulation Panels. Dated 17th of June 2009 the German Institut for civil engineering (DIBT) granted the approval by the building authorities for Vacupor® PS-B2 under the certification number Z-23.11-1662. The approval was granted for the products Vacupor® NT-B2, Vacupor® RP-B2 and Vacupor® PS-B2 and its use in a total of ten applications for indoor- and outdoor-applications. more...
- Vacupor® XPS
Vacupor ® XPS is particularly suitable for plane layings on ceilings and walls. Vacupor ® XPS is already coated on both sides with extruded polystyrene foam sheets. Through this coverage, the fixing of the insulation is much easier, due to the possibility of bonding with commercially available polystyrene adhesives. more...
- Vacupor® FP
Due to the usage of a special silicate fiber-filament in combination with a higher density, Vacupor FP is suitable for applications where higher demands on the fire protection properties are required.The density of the core material is significantly higher and prevents the core from collapsing in case of fire. more...
- Vacupor® Insert NT
Vacupor® Insert NT is our standard core material (Insert) for the production of Vacuum Insulation Panels. Vacupor® Insert NT is available shrink-wrapped in a PE plastic foil or wrapped into a PP non-woven material. In Vacuum Insulation Panels extraordinarily low heat conductivity values and enormously long life times can be reached with this core. more...
- Vacupor® Insert FP
Through the use of a silica fiber filament together with higher density, Vacupor® Insert FP is particularly suitable for the production of Vacuum Isulation Panels, with higher demands for fire protection porperties. The core material is clearly firmer and remains stable in case of fire. more...
DEUTSCH